Introduction

When it comes to maintaining your lawn, a lawn mower is an essential tool. But, do you know the size of your mower’s deck? The deck size is an important factor to consider when purchasing a new mower blade. In this article, we will guide you on how to measure your lawn mower deck size.

Step by Step Guide

Step 1: Find the Model Number

The first step is to find the model number of your lawn mower. The model number is usually located on the top of the deck or on the side of the engine. Once you have found the model number, write it down for future reference.

Step 2: Measure the Width of the Deck

To measure the width of the deck, you need to measure the distance between the two outermost points of the deck. Use a tape measure to get an accurate measurement. Make sure to measure from the edge of one blade to the edge of the other blade.

Step 3: Measure the Length of the Deck

Next, you need to measure the length of the deck. This is done by measuring from the front of the deck to the back of the deck. Again, use a tape measure to get an accurate measurement.

Step 4: Multiply the Width and Length

Once you have measured the width and length of the deck, you need to multiply these two numbers together. This will give you the total square footage of the deck. For example, if the width of the deck is 30 inches and the length is 40 inches, then the total square footage of the deck is 1200 square inches.

Step 5: Convert to Square Feet

To convert the square inches to square feet, divide the total square footage by 144. In our example, the total square footage is 1200, so when we divide by 144, we get 8.33 square feet.

Conclusion

Measuring the deck size of your lawn mower is a simple task that can save you time and money in the long run. By following these simple steps, you can accurately measure your lawn mower deck size and ensure that you purchase the correct size mower blade for your machine. Remember to always refer to your lawn mower’s manual for specific instructions and recommendations.